Hi-Foam Traffic Film Remover
- Synergised bi-ionic formulation
- Enriched with shine enhancing polymers
- Suitable for all foaming and wash equipment
- Biodegradable and phosphate free
Apply hot or cold using the following dilutions: Foam: 1:20 - 1:50 Traffic film removal: 1:40 - 1:150 Pre-spray: 1:5 - 1:20 Dilution rates will vary according to water hardness & degree of soiling. Ensure surface is cool. In hot weather pre-wet vehicle with water. Apply chemical from bottom up. If using foam allow to dwell until foam starts to break. Rinse with water. Do not allow product to dry.
25L / 205L / 1000L
CAUTION: This product may affect some alloys or single pack paint finishes. If in doubt, check before use.